Laser paint stripping technology has been used to remove coating of CFRP laminate.Through Changing the laser power,pulse frequency,scan speed and scan times of the equipment,the effects of different parameters on the surface temperature,apparent morphology and mechanical properties were studied.The results shown that the surface temperature was below 60℃ after laser paint stripping by optimize the parameter,and the laser can accurately remove the top coating and primer while had no damage to the base material.Flexural properties were reduced about 8.82% after several times scan.The results proven the laser paint stripping technology for CFRP laminate was feasibility.
[1] 程秀全,张建荣.喷丸成形技术在民航领域的应用[J].特种成形,2007(4):77-80.
[2] 宣善勇.飞机复合材料部件表面激光除漆技术研究进展[J].航空维修与工程,2016(8):15-18.
[3] Schweizer G,Werner L.Industrial 2kW TEA CO2 laser for paint stripping of aircraft[J].SPIE,1995,2502:57-62.
[4] Hart W G J't.Paint stripping techniques for composite aircraft components[C].Warsaw,Poland:RTO/AVT Specialists Meeting,2003.
[5] Ted Reutzel.Automated laser stripping system for thin composite rotor blades:project review and status[C].Baltimore,MD:NCMS CTMA Symposium,2008.
[6] 谭荣清,郑光,郑义军,等.激光除漆对基材力学性能的影响[J].激光杂志,2005,26(6):83-84.
[7] 胡久,马路,王文全,等.激光除漆与溶剂除漆对飞机蒙皮零件的性能影响[J].金属世界,2017(6):6-9.
[8] Iwahori Y,Hasegawa T,Nakane K.Experimental evaluation for CFRP strength after various paint striping methods[C].Kyoto,Japan:16th International Conference on Composite Materials,2007.
[9] Hong S C,Chong S Y,Lee J R,et al.Investigation of laser pulse fatigue effect on unpainted and painted CFRP structures[J].Composites:Part B,2014,58:343-351.
