In order to further improve the performance of zinc-ion batteries,the cathodes and anodes of the battery were designed at the same time.Manganese dioxide (MnO2) with different crystallines was synthesized by liquid-phase coprecipitation with different proportions of ammonium persulfate ((NH4)2S2O8) and manganese sulfate (MnSO4).It was found that with the increase of the molar concentration ratio of (NH4)2S2O8∶MnSO4,the crystalline of MnO2 gradually changed from urchin-like γ-MnO2 to fine rod-like α-MnO2.The specific capacity of γ-MnO2 was higher than that of α-MnO2.Under the current density of 0.1A/g,the specific capacity of Zn-ion batteries with γ-MnO2 cathode can reach 354mAh/g,while the specific capacity of Zn-ion batteries with α-MnO2 cathode was 200mAh/g.Then Sn/Zn composite metal anode was prepared by electrodeposition of zinc on Sn substrate.Finally,the high capacity of γ-MnO2 was selected as the cathode,and matched with Sn/Zn anode to assemble the γ-MnO2Sn/Zn Zn-ion batteries.The capacity of 125mAh/g was maintained after 1000 cycles under the current density of 1A/g.
Chang Ziwen, Kang Zhuang, Liu Wenbao, Mou Jian, Xu Chengjun
. Study of Zn-ion battery based on MnO2 with different crystalline and Zn composite metal anode[J]. New Chemical Materials, 2021
, 49(5)
: 107
-110
.
DOI: 10.19817/j.cnki.issn 1006-3536.2021.05.024
[1] Yao Y,McDowell M T,Ryu I,et al.Interconnected silicon hollow nanospheres for lithium-ion battery anodes with long cycle life[J].Nano Letters,2011,11(7):2949-2954.
[2] Tu Z,Choudhury S,Zachman M J,et al.Fast ion transport at solid-solid interfaces in hybrid battery anodes[J].Nature Energy,2018,3(4):310-316.
[3] Qiu W,Li Y,You A,et al.High-performance flexible quasi-solid-state Zn-MnO2 battery based on MnO2 nanorod arrays coated 3D porous nitrogen-doped carbon cloth[J].Journal of Materials Chemistry A,2017,5(28):14838-14846.
[4] Liu W,Li W,Zhuo D,et al.Core-shell nanoparticle coating as an interfacial layer for dendrite-free lithium metal anodes[J].ACS Central Science,2017,3(2):135-140.
[5] Li Q,Zhu S,Lu Y.3D porous Cu current collector/Li-metal composite anode for stable lithium-metal batteries[J].Advanced Functional Materials,2017,27(18):1606422.
[6] Lee B,Yoon C S,Lee H R,et al.Electrochemically-induced reversible transition from the tunneled to layered polymorphs of manganese dioxide[J].Scientific Reports,2014,4(1):6066.
[7] Konarov A,Voronina N,Jo J H,et al.Present and future perspective on electrode materials for rechargeable zinc-ion batteries[J].ACS Energy Letters,2018,3(10),2620-2640.
[8] Kaveevivitchai W,Manthiram A.High-capacity zinc-ion storage in an open-tunnel oxide for aqueous and nonaqueous Zn-ion batteries[J].Journal of Materials Chemistry A,2016,4(48):18737-18741.
[9] Fang G,Zhou J,Pan A,et al.Recent advances in aqueous zinc-ion batteries[J].ACS Energy Letters,2018,3(10):2480-2501.
[10] Xu C,Li B,Du H,et al.Energetic zinc ion chemistry:the rechargeable zinc ion battery[J].Angewandte Chemie International Edition,2012,51(4):933-935.
[11] Song M,Tan H,Chao D,et al.Recent advances in Zn-ion batteries[J].Advanced Functional Materials,2018,28(41):1802564.
[12] Alfaruqi M H,Gim J,Kim S,et al.Enhanced reversible divalent zinc storage in a structurally stable α-MnO2 nanorod electrode[J].Journal of Power Sources,2015,288:320-327.
[13] Alfaruqi M H,Mathew V,Gim J,et al.Electrochemically induced structural transformation in a γ-MnO2 cathode of a high capacity zinc-ion battery system[J].Chemistry of Materials,2015,27(10):3609-3620.
[14] Kang Z,Wu C,Dong L,et al.3D porous copper skeleton supported zinc anode toward high capacity and long cycle life zinc ion batteries[J].ACS Sustainable Chemistry & Engineering,2019,7:3364-3371.
