Please wait a minute...
 首页  期刊简介 期刊订阅 广告合作 联系我们
 
最新录用  |  当期目录  |  过刊浏览  |  热点文章  |  阅读排行
化工新型材料  2018, Vol. 46 Issue (3): 200-202    
  科学研究 本期目录 | 过刊浏览 | 高级检索 |
半永久型有机氟脱模剂的制备及性能研究
范洋洋1, 李斌2, 张晨1, 陈良兵1, 刘彦军1
1.大连工业大学轻工与化学工程学院,大连116034;
2.厦门爱思康新材料有限公司,厦门361000
Preparation property of semi-permanent mold release agent at room temperature
Fan Yangyang1, Li Bin2, Zhang Chen1, Chen Liangbing1, Liu Yanjun1
1.School of Light Industry and Chemical Engineering,Dalian Polytechnic University,Dalian 116034;
2.Xiamen Ace Kang New Material Co.,Ltd.,Xiamen 361000
下载:  PDF (1844KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 以全氟聚醚酰氟为原料,水解制成全氟聚醚羧酸,再将全氟聚醚羧酸进一步氨化成全氟聚醚酰胺。利用非离子表面活性剂等将其乳化,制得水性有机氟乳液型脱模剂。通过改变水性乳液中各组分含量提高脱模剂的脱模性能及稳定性能,并进行了红外光谱分析、表面接触角的分析以及剥离试验等表征。结果表明:水性有机氟乳液型脱模剂的含量在3.5%,水性有机氟脱模剂的性能最好,涂覆的膜层能在25℃下28min内快速固化,脱模次数可达到20次以上,并多次脱模后其剥离力低于4.8N/cm。可用于树脂等制品的脱模。制备乳液时,乳化剂采用TO-7和TO-12比值为1∶7复配制备的有机氟乳液亲水亲油平衡(HLB)值达11.5,乳化时温度控制在68℃时制备的乳液最为稳定,放置2月后不会变性。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
范洋洋
李斌
张晨
陈良兵
刘彦军
关键词:  室温固化  脱模剂  有机氟  乳液    
Abstract: Using perfluoropolyether acyl fluoride as raw material,the first of its hydrolysis made perfluoropolyether carboxylic acid,then perfluoropolyether carboxylic acid ammoniation further made perfluoropolyether amide.Then the organic fluorine water emulsion type release agent was made by using non-ionic surfactant emulsion.The release performance and stability of release agent were improved by changing the content of water emulsion,and the analysis of the infrared spectrum,the contact angle and the stripping test were carried out.Results showed that when the organic fluorine solid content of release agent was 3.5%,the release agent had the best performance.The coating film can be rapidly solidified within 28 min under 25℃,remolding number can reach more than 20 times,and many times after stripping the stripping force was smaller than 4.8N/cm.The release agent can be used for resin and other products stripping.Preparation of emulsion was,emulsifier used TO-7 combined with TO-12,the ratio of 1∶7 in emulsion,HLB value was 11.5,when the emulsification temperature was controlled at 68℃,the prepared emulsion reached the most stable for 2 months not degeneration.
Key words:  room temperature curing    mold release agent    organic fluorine    emulsion
收稿日期:  2016-12-13                出版日期:  2018-03-20      发布日期:  2018-04-09      期的出版日期:  2018-03-20
作者简介:  范洋洋(1991-),女,硕士研究生,主要研究方向为功能高分子材料。
引用本文:    
范洋洋, 李斌, 张晨, 陈良兵, 刘彦军. 半永久型有机氟脱模剂的制备及性能研究[J]. 化工新型材料, 2018, 46(3): 200-202.
Fan Yangyang, Li Bin, Zhang Chen, Chen Liangbing, Liu Yanjun. Preparation property of semi-permanent mold release agent at room temperature. New Chemical Materials, 2018, 46(3): 200-202.
链接本文:  
http://www.hgxx.org/CN/  或          http://www.hgxx.org/CN/Y2018/V46/I3/200
[1] 曹润生,蒋崇文,王树华,等.含氟脱模剂的合成与应用研究[J].化工生产与技术,2007,14(2):12-14.<br /> [2] 雷志刚.含氟脱模剂的制备与应用技术研究[D].杭州:浙江工业大学,2009.<br /> [3] 王强,刘隐春.道康宁PU用脱模剂的性能及应用[J].化工新型材料,2010,38(8):39-42.<br /> [4] 胡建明,佘斌.环保型水溶性脱模剂的研制[J].邵阳学院学报,2012,8(4):60-64.<br /> [5] 陆艳红,陈哲.脱模剂的研究及应用[J].硅谷,2009,10(20):148-149.<br /> [6] Zou X W,Qin T F,Wang Y,et al.Synthesis and properties of polyurethane foams prepared from heavy oil modified by polyols with 4,4′-methylene-diphenylene isocyanate(MDI)[J].Bioresource Technology,2012,114(1):654-657.<br /> [7] 吴耀祖,黄炳荣,景宗梁.第3代脱模剂和清洗剂及其应用[J].铸造技术,2012,32(12):1709-1711.<br /> [8] Hou B,Cao Z,Chen W.A process for the preparation of emulsified wax[J].Petroleum Science and Technology,2007,25(11/12):1549-1555.<br /> [9] 李冬,董继学,田小顺,等.半永久性脱模剂在轿车子午线轮胎生产中的应用[J].轮胎工业,2010,30(5):303-306.<br /> [10] 周海滨.用半永久性脱模剂帮助脱模及防止模具污染[J].世界橡胶工业,2007,34(1):33-36.<br /> [11] Dowing E A,Hesselink L,Maefarlane R M,et al.A laser diode drive,three color,so1id state 3-D display[C].Anaheim California:Optical Society of America Conference on Lasers and Electro-Optics,1996.<br /> [12] Du D X,Geng D C,Sun S J,et al.Surface tension measurement by the drop volume method[J].Key Engineering Materials,2012,501:407-412.
[1] 闫继芳, 彭辰晨, 王琪, 徐英杰, 黄蓓青, 魏先福. 水性油墨用纯丙乳液的合成及在BOPP薄膜上的附着牢度[J]. 化工新型材料, 2018, 46(8): 127-132.
[2] 王宇飞, 贾云祯, 秦亚琼, 郑丽萍, 李维实, 杨松. 无机盐对聚甲基丙烯酸缩水甘油酯互通多孔材料的结构调控[J]. 化工新型材料, 2018, 46(8): 153-157.
[3] 杨明明, 李成浩, 孙志高, 刘旻瑞, 朱明贵, 李翠敏, 李娟. 液体石蜡乳液制备及其性能研究[J]. 化工新型材料, 2018, 46(7): 224-226.
[4] 戴姗姗, 寇子敏, 刘艳, 彭皓. SiO2/聚丙烯酰胺核壳复合材料的制备研究[J]. 化工新型材料, 2018, 46(6): 135-139.
[5] 崔野, 崔海清, 刘福瑞, 雷良才, 李海英. 可逆加成-断裂链转移聚合-细乳液聚合法合成聚异戊二烯-b-聚苯乙烯-b-聚甲基丙烯酸甲酯三嵌段共聚物[J]. 化工新型材料, 2018, 46(5): 166-169.
[6] 乔红斌, 田闽, 古绪鹏, 李龙娥, 宁珅, 陈国昌, 王圣达. 钢结构水性带锈防腐涂料制备与性能研究[J]. 化工新型材料, 2018, 46(4): 224-226.
[7] 何彬, 张建安, 吴明元, 吴庆云, 杨建军. Pickering细乳液法制备无机聚合物复合中空微球[J]. 化工新型材料, 2018, 46(3): 156-159.
[8] 罗源军. 含氟丙烯酸酯四元共聚乳液的合成与性能研究[J]. 化工新型材料, 2018, 46(3): 232-234.
[9] 江娟, 周纯, 黎彧, 吕晓君, 马佳莹, 梁贤, 陈杰明. 抗菌抗老化硅溶胶/纯丙乳液复合涂料的制备[J]. 化工新型材料, 2018, 46(2): 256-258.
[10] 罗建新, 张春燕, 郭伟伟, 黄亚奥, 熊布木吉, 蔡松韬. 磷酸酯共聚改性丙烯酸酯乳液及乳胶涂料的研究[J]. 化工新型材料, 2018, 46(1): 165-168.
[11] 董殿权,房超. PMMA纳米微球的制备与表征[J]. 化工新型材料, 2017, 45(9): 68-70.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-38
版权所有 © 《化工新型材料》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn