Please wait a minute...
 首页  期刊简介 期刊订阅 广告合作 联系我们
 
最新录用  |  当期目录  |  过刊浏览  |  热点文章  |  阅读排行
化工新型材料  2019, Vol. 47 Issue (4): 167-170    
  科学研究 本期目录 | 过刊浏览 | 高级检索 |
“离位”增韧ES-U3160/5284复合材料的制备及性能研究
闫丽,安学锋
中航工业复合材料技术中心,先进复合材料重点实验室,中航复合材料有限责任公司,北京100095
Study on preparation and property of ES-U3160/5284 composite by ex-situ toughening
Yan Li, An Xuefeng
National Key Laboratory of Advanced Composites,AVIC Composite Technology Center, Composites Company LTD of AVIC,Beijing 100095
下载:  PDF (6070KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 通过扫描电子显微镜分析和树脂冲击性能测试,研究了聚醚砜(PES)对高温环氧树脂5284性能的影响及增韧机理,并基于“离位”增韧技术制备了具有增韧功能的ES-U3160织物。以ES-U3160织物作为增强体,采用树脂转移模塑成型(RTM)工艺制备了ES-U3160/5284复合材料,并对复合材料的韧性性能进行研究。结果表明:随着PES含量的增加,环氧树脂5284的冲击韧性大幅度提高;PES与5284树脂形成了双连续相结构,有效地阻止了裂纹的扩展,起到了增韧的作用。与未增韧复合材料相比,“离位”增韧ES-U3160/5284复合材料的I型层间断裂韧性(GⅠC)、Ⅱ型层间断裂韧性(GⅡC)及冲击后压缩强度(CAI)都有较大的提高。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
闫丽
安学锋
关键词:  ES-U3160织物  “离位”增韧  复合材料  冲击后压缩强度  层间断裂韧性    
Abstract: The effect of PES on the properties of 5284 resin and the toughening mechanism were investigated by SEM and mechanical properties tests of resin.ES-U3160 fabrics with toughening function were prepared according to ex-situ toughening technology.ES-U3160/5284 composites were prepared by RTM process taking ES-U3160 fabrics as reinforcement,and the properties of toughness of composites were studied.The results showed that with the increase of PES content,the impact toughness of 5284 resin was greatly improved.PES and 5284 resin formed a double continuous phase structure,which effectively prevented the crack propagation and played a role in toughening.GⅠC value,GⅡC value and CAI value of ES-U3160/5284 were greatly improved,compared with that of un-toughened composite.
Key words:  ES-U3160 fabrics    ex-situ toughening    composite    CAI    interlaminar fracture toughness
                    发布日期:  2019-05-20      期的出版日期:  2019-05-20
作者简介:  闫丽(1982-),女,高级工程师,主要从事树脂基复合材料的研究工作。
引用本文:    
闫丽,安学锋. “离位”增韧ES-U3160/5284复合材料的制备及性能研究[J]. 化工新型材料, 2019, 47(4): 167-170.
Yan Li, An Xuefeng. Study on preparation and property of ES-U3160/5284 composite by ex-situ toughening. New Chemical Materials, 2019, 47(4): 167-170.
链接本文:  
http://www.hgxx.org/CN/  或          http://www.hgxx.org/CN/Y2019/V47/I4/167
[1] Yee A F.Modifying matrix materials for tougher composites[C].ASTM Toughened Composite Symposium.Houston:1985.
[2] Joshi S P,Sun C T.Impact induced fracture in a laminated composite[J].Journal of Composites Materials,1985,19(1):51-66.
[3] Hull D,Shi Y B.Damage mechanism characterization in composite damage tolerance investigations[J].Composites Structure,1993,23(2):99-120.
[4] 益小苏,安学锋,唐邦铭,等.一种提高层状复合材料韧性的方法:中国,01100981.0[P].2001-03-26.
[5] 益小苏.先进树脂转移模塑树脂基复合材料技术研究进展[C].第十五届全国复合材料学术会议论文集.哈尔滨:2008.
[6] 刘志真,李宏运,邢军.RTM聚酰亚胺复合材料“离位”增韧技术研究[J].航空材料学报,2008,28(6):72-77.
[7] 闫丽,安学锋.RTM用ES-Fabric增强织物的制备及其复合材料性能研究[J].化工新型材料,2016,44(4):94-96.
[8] 张朋,刘刚,胡晓兰.结构化增韧层增韧RTM复合材料性能[J].复合材料学报,2012,29(4):1-9.
[9] Long W,Xu Y H,Yi X S.Preliminary study on resin transfer molding of highly toughened graphite laminate by ex-situ method[J].Journal of Materials Science,2004,39(6):2263-266.
[10] Cheng Q F,Fang Z P,Xu Y H,et al.Morphological and spatial effects on toughness and impact damage resistance of PAEK-toughened BMI and graphite fiber composite laminates[J].Chinese Journal of Aeronautics,2009,22(1):87-96.
[11] 益小苏,安学锋,张明,等.一种液态成型复合材料用预制织物及其制备方法:中国,200810000135.2[P].2008-01-04.
[12] Inoue,Akashi.Reaction-induced phase decomposition in polymer blends[J].Progress in Polymer Science,1995,20(1):119-153.
[1] 丛庆,林凤森,李光友,曲晓东,王龙,李丰选. 高性能碳纤维/环氧树脂复合材料板的制备及其性能表征研究[J]. 化工新型材料, 2019, 47(4): 81-83.
[2] 段宪法,李玲,赵晓芳,于永建,刘翔宇. 改性双马来酰亚胺/苯并GFDA1嗪共混树脂性能的研究[J]. 化工新型材料, 2019, 47(4): 96-99.
[3] 徐海升, 何丽娟, 王豪. 新型石墨烯复合材料的制备及其催化应用研究进展[J]. 化工新型材料, 2019, 47(3): 6-10.
[4] 郝盈颖,孙学凤,石磊,周国伟. 不同形貌NiMoO4纳米材料及其复合材料的制备和应用研究进展[J]. 化工新型材料, 2019, 47(3): 20-25.
[5] 罗超,曹海建,黄晓梅,金博伦,王洪. 树脂基体种类对三维中空夹芯织物复合材料力学性能影响的研究[J]. 化工新型材料, 2019, 47(3): 138-142.
[6] 付欣, 杨蓉, 刘磊, 陈丹, 朱岸明, 李嘶晨, 路蕾蕾. 蜂窝状三维碳材料的制备及其在锂硫电池中的应用研究[J]. 化工新型材料, 2019, 47(2): 85-89.
[7] 周云斌, 李敏娜, 居璨, 周林成, 吴琼, 黄峥. 负载Pd蛋黄-蛋壳型磁性碳纳米复合材料Fe3O4@C-Pd的制备及其催化性能研究[J]. 化工新型材料, 2019, 47(2): 223-227.
[8] 吴蓬勃, 王成君, 朱洪宇, 孙寒雪. 多孔石墨烯制备及其纳米复合材料的研究进展[J]. 化工新型材料, 2019, 47(1): 6-9.
[9] 温友, 孟祥胜, 范卫锋, 阎敬灵, 王震. 聚酰亚胺纤维增强树脂基复合材料的研究[J]. 化工新型材料, 2019, 47(1): 57-61.
[10] 吴胜学, 熊玉竹, 王兵辉, 张清坡, 王倩, 江猛. 改性芳纶纤维/天然橡胶复合材料的制备及性能表征[J]. 化工新型材料, 2019, 47(1): 62-65.
[11] 周彬, 钟良. 麦秸秆纤维复合工程塑料性能的研究[J]. 化工新型材料, 2019, 47(1): 148-151.
[12] 苏罗川, 宜晨虹, 刘文杰. 超高分子量聚乙烯纤维复合材料的应用及其抗侵彻性能研究[J]. 化工新型材料, 2019, 47(1): 198-201.
[13] 姚夏妍, 鲁兴武, 程亮, 张恩玉. 磁场对氨基和巯基修饰多壁碳纳米管复合材料吸附苯酚的影响[J]. 化工新型材料, 2019, 47(1): 189-193.
[14] 熊煦, 陈晓松, 高炜斌, 杨海存, 芮月月. 废印刷电路板粉填充改性丁苯橡胶复合材料的性能研究[J]. 化工新型材料, 2019, 47(1): 206-210.
[15] 关恩昊, 岳红彦, 高鑫, 王宝, 王婉秋, 王钊, 宋姗姗, 张宏杰. TiO2纳米线(管)-石墨烯的制备方法和应用现状[J]. 化工新型材料, 2018, 46(9): 13-16.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-38
版权所有 © 《化工新型材料》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn