聚乳酸/麦秸粉复合材料的制备及性能研究
毕永豹, 杨兆哲, 许民*
东北林业大学生物质材料科学与技术教育部重点实验室,哈尔滨150040
Study on preparation and property of polylactic acid/wheat straw powder composite
Bi Yongbao, Yang Zhaozhe, Xu Min
Key Laboratory of Bio-based Material Science and Technology of Ministry of Education,Northeast Forestry University,Harbin 150040
摘要 采用麦秸粉、聚乳酸(PLA)、偶联剂(KH550)、增塑剂(PEG400)、助剂,制得PLA/麦秸粉复合材料,探究了麦秸粉、KH550、PEG400、助剂的用量对PLA/麦秸粉复合材料力学性能的影响。研究结果表明:麦秸粉用量过多会导致PLA/麦秸粉复合材料的力学性能降低,在麦秸粉用量为10%(wt,质量分数,下同)、PLA用量为90%、KH550用量为6%、PEG400用量为10%,助剂用量为1%条件下,制得的PLA/麦秸粉复合材料的拉伸强度为38.0MPa,断裂拉伸应变为40.0%,弯曲强度为60.0MPa,冲击强度为14.0kJ/m2 ,具有较好的力学性能。
关键词:
聚乳酸
生物质聚合物复合材料
力学性能
微观形貌
Abstract: The effects of the content of wheat straw powder,coupling agent (KH550) and plasticizer (PEG400) on the properties of PLA (polylactic acid)/wheat straw powder composite were studied by single factor experiment.The results showed that the mechanical properties of composites were decreased with the increase of the content of wheat straw powder.With the content of 10wt% wheat straw powder,90wt% PLA,6wt% KH550 and 1wt% additive,the tensile strength,fracture tensile strain,flexural strength and impact strength of composites were 38.0MPa,40.0%,60.0MPa and 14.0kJ/m2 respectively.The composite showed good mechanical properties.
Key words:
polylactic acid
biomass polymer composite
mechanical property
microstructure
收稿日期: 2017-04-05
发布日期: 2018-09-18
期的出版日期: 2018-08-20
基金资助: 中央高校基本科研业务费专项基金项目(2572015AB23)
通讯作者:
许民(1963-),女,教授,研究方向为生物质复合材料。
作者简介: 毕永豹(1991-),男,硕士,研究方向为生物质复合材料。
[1] 杨玲玲,李慧,钟志有.聚丙烯基木塑复合材料力学性能的研究[J].塑料科技,2010,38(2):36-39. [2] 汪群慧,孙晓红,孟令辉.工业评述生物降解性塑料-聚乳酸研究进展[J].塑料工业,2003,31(5):61-65. [3] Kristina O,Henrik L,Allan H.The nature and location of SEBSMA compatibilizer in polyethylene wood flour composites[J].Journal of Applied Polymer Science,1998,69(1):201-209. [4] Gui Zongyan,Xu Yuanyuan,Gao Yun.Novel polyethylene glycol-based polyester-toughened polylactide[J].Materials Letters,2012,71:63-65. [5] 钱欣,田怡.聚乙二醇增塑聚乳酸的等温结晶动力学研究[J].塑料工业,2006,34(S1):221-223. [6] 朱栋君.不同填料及塑料基木塑复合材料模压成型工艺及其性能研究[D].南京:南京农业大学,2010. [7] 李春桃.硅烷偶联剂改性木粉/HDPE复合材料的研究[D].哈尔滨:东北林业大学,2010. [8] Koay Seong Chun,Salmah Husseinsyah,Hakimah Osman.Mechanical and thermal properties of coconut shell powder filled polylactic acid biocomposites:effects of the filler content and silane coupling agent[J].Journal of Polymer Research,2014,19(5):990-996.
[1]
Xiao Yu, Lv Cheng, Zhang Guoyou. Epoxy resin modified by PMMA microsphere wrapped by graphene oxide [J]. New Chemical Materials, 2017, 45(9): 62
-64
.
[2]
Su Wei, Ran Meng, Zhang Ai, Sun Yan. Preparation of sulfur-doped microporous carbon and its adsorption property [J]. New Chemical Materials, 2018, 46(4): 161
-164
.
[3]
Fan Yingge. Study on preparation and optical property of one-dimensional ZnO nanorod by sol-gel dip coating [J]. New Chemical Materials, 2018, 46(4): 189
-192
.
[4]
Zheng Zhen, Ding Chengli, Li Huiping, Fu Jingjing. Synthesis and property of hydrophobic functionalized cotton linter cellulose/SiO2 composite aerogel [J]. New Chemical Materials, 2018, 46(4): 230
-233
.
[5]
Lin Yuan. Research status and application progress of thin film solar cells [J]. New Chemical Materials, 2018, 46(6): 57
-60
.
[6]
Chen Kai, Wang Qiang, Sun Ting, You Min, Xia Zuxi. Research on impact of chemical etching on superhydrophobic surface property [J]. New Chemical Materials, 2018, 46(6): 206
-209
.
[7]
Zheng Dandan, Chang Wei, Xi Qiang, Yu Cuihua. Preparation and photocatalytic activity of Cd1-x Znx S [J]. New Chemical Materials, 2018, 46(5): 181
-183
.
[8]
Han Fei, Zong Yue, Di Song, Wang Shaopo. Adsorption of copper ion in aqueous solution by activated boron nitride [J]. New Chemical Materials, 2018, 46(5): 195
-198
.
[9]
Chang Lin, Zhao Yuntao, Bi Yinping, Ren Yiwei. Preparation and characterization of sodium polystyrene sulfonate grafted polysulfone forward osmosis membrane [J]. New Chemical Materials, 2018, 46(7): 114
-117
.
[10]
Cai Tingting, Liu Rongwei, Wang Yuanyuan, Zhai Yongxing, Duan Ze, Zhang Jian. Preparation and electrochemical performance test of nickel cobalt sulfide/carbon microsphere electrode [J]. New Chemical Materials, 2018, 46(8): 119
-122
.
Viewed
Full text
Abstract
Cited
Shared
Discussed