Please wait a minute...
 首页  期刊简介 期刊订阅 广告合作 联系我们
 
最新录用  |  当期目录  |  过刊浏览  |  热点文章  |  阅读排行
化工新型材料  2018, Vol. 46 Issue (4): 78-81    
  新材料与新技术 本期目录 | 过刊浏览 | 高级检索 |
酶解木质素基酚醛模塑料的制备及性能研究
周静1, 胡立红1,2*, 周永红1, 薄采颖1, 贾普友1
1.中国林业科学研究院林产化学工业研究所,生物质化学利用国家工程实验室,国家林业局林产化学工程重点开放性实验室,江苏省生物质能源与材料重点实验室,南京210042;
2.中国林业科学研究院林业新技术研究所,北京100091
Preparation and characterization of lignin-based phenolic molding compound
Zhou Jing1, Hu Lihong1,2, Zhou Yonghong1, Bo Caiying1, Jia Puyou1
1.Institute of Chemical Industry of Forest Products,CAF;National Engineering Laboratory for Biomass Chemical Utilization;Key and Open Laboratory on Forest Chemical Engineering,SFA;Key Laboratory Biomass Energy and Material,Jiangsu Province,Nanjing 210042;
2.Institute of New Technology of Forestry,CAF,Beijing 100091
下载:  PDF (3434KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 使用酶解木质素部分替代苯酚制备热塑性酚醛树脂,然后用自制的酶解木质素基酚醛树脂完全替代普通酚醛树脂制备酶解木质素基酚醛模塑料。通过对酶解木质素基酚醛模塑料的冲击强度、弯曲强度和热形变温度等性能的测试,分析酶解木质素的替代率对酚醛模塑料性能的影响,选出合适的替代率,并对该替代率下的酚醛模塑料进行生物降解性能测试。结果表明:在酶解木质素对苯酚的质量替代率为50%时,得到的酶解木质素基酚醛模塑料各项性能良好,而且生物降解性得到大幅度提高,尤其是对其中生物质的降解率达到90%。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
周静
胡立红
周永红
薄采颖
贾普友
关键词:  酶解木质素  酚醛树脂  模塑料  生物降解    
Abstract: Lignin was successfully used to partly replace phenol preparation of thermoplastic phenolic resin,and then ordinary phenolic resin was entirely replaced by lignin-based phenolic resin to prepare phenolic molding compound.In order to find suitable replacement rate of lignin,the impact strength,bending strength and thermal deformation temperature performance of compound were investigated.The results showed that the performance of compound were well,when the substitution rate was 50%.What was more important that the biodegradability were greatly improved,which of the biomass degradation rate was above 90%.
Key words:  lignin    phenolic resin    moulding compound    biodegradation
收稿日期:  2016-12-15                出版日期:  2018-04-20      发布日期:  2018-05-17      期的出版日期:  2018-04-20
基金资助: 国家“863”计划(2013AA050703)
通讯作者:  胡立红,副研究员,主要从事生物基高分子材料研究。   
作者简介:  周静(1989-),女,博士研究生,主要从事生物基高分子材料的研究。
引用本文:    
周静, 胡立红, 周永红, 薄采颖, 贾普友. 酶解木质素基酚醛模塑料的制备及性能研究[J]. 化工新型材料, 2018, 46(4): 78-81.
Zhou Jing, Hu Lihong, Zhou Yonghong, Bo Caiying, Jia Puyou. Preparation and characterization of lignin-based phenolic molding compound. New Chemical Materials, 2018, 46(4): 78-81.
链接本文:  
http://www.hgxx.org/CN/  或          http://www.hgxx.org/CN/Y2018/V46/I4/78
[1] 黎先发,罗学刚.木质素在塑料中的应用研究进展[J].塑料,2004,33(4):58-61.
[2] 张应龙,张锐昌,张咏梅.木质素结构降解分析及进展[J].化工新型材料,2012,40(10):18-20.
[3] Hüttermann A,Mai C,Kharazipour A.Modification of lignin for the production of new compounded materials[J].Applied Microbiology and Biotechnology,2001,55(4):387-394.
[4] 刘晓玲,程贤甦.酶解木质素的分离与结构研究[J].纤维素科学与技术,2007,15(3):41-46.
[5] Thielemans W,Can E,Morye S S,et al.Novel applications of lignin in composite materials[J].Journal of Applied Polymer Science,2002,83(2):323-331.
[6] 方润,陈云平,程贤甦.溶剂型木质素在高分子合成和改性中的应用[J].纤维素科学与技术,2007,15(3):56-60.
[7] Maldas D,Shiraishi N.Liquefaction of biomass in the presence of phenol and H2O using alkalies and salts as the catalyst[J].Fuel & Energy Abstracts,1997,38(4):241.
[8] 胡立红,周永红,刘红军.热塑性木质素酚醛树脂固化动力学研究[J].中国塑料,2008,22(8):22-25.
[9] Lee W J,Wu Y H,Wu C C,et al.Properties of compression-molded plates made from wood powders impregnated with liquefied wood-based novolak-type phenol-formaldehyde resins[J].Journal of Applied Polymer Science,2010,118(6):3471-3476.
[10] 周静,胡立红,周永红,等.热塑性木质素-苯酚-甲醛树脂的合成及表征[J].化工新型材料,2015,43(11):65-67.
[11] 胡立红,周永红,冯国东,等.木质素酚醛模塑料的性能研究[J].生物质化学工程,2009,43(4):25-28.
[1] 王娅楠, 刘建军, 韩笑. 酚醛树脂基预浸料的研究进展及其应用[J]. 化工新型材料, 2018, 46(7): 269-272.
[2] 周鹏, 彭志远. 含酚羟基吸附树脂的研究进展[J]. 化工新型材料, 2018, 46(7): 44-47.
[3] 徐亮, 赵景, 陈泽旭, 李松彦, 盛扬, 孙一新, 张嵘. 以聚乳酸-b-聚乙二醇-b-聚乳酸二丙烯酸酯为交联剂的pH响应型水凝胶的制备及药物控制释放研究[J]. 化工新型材料, 2018, 46(3): 210-214.
[4] 刘德居,赵东阳,周海军,陈孝起,李彦涛. 炭黑对氯化丁基橡胶阻尼材料性能影响研究[J]. 化工新型材料, 2017, 45(9): 139-141.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-38
版权所有 © 《化工新型材料》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn