Please wait a minute...
 首页  期刊简介 期刊订阅 广告合作 联系我们
 
最新录用  |  当期目录  |  过刊浏览  |  热点文章  |  阅读排行
化工新型材料  2019, Vol. 47 Issue (9): 203-206    
  科学研究 本期目录 | 过刊浏览 | 高级检索 |
相容剂对聚丙烯/聚乙醇酸共混物结构与性能的影响
贾天飞1, 杨海存1*, 马文中1, 龚方红1,2, 陶国良1, 刘春林1
1.常州大学材料科学与工程学院江苏省环境友好高分子材料重点实验室,常州213164;
2.无锡职业技术学院机械技术学院,无锡214121
Influence of compatilizer on the structure and property of PP/PGA
Jia Tianfei1, Yang Haicun1, Ma Wenzhong1, Gong Fanghong1,2, Tao Guoliang1, Liu Chunlin1
1.Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials,School of Materials Science and Engineering,Changzhou University,Changzhou 213164;
2.Department of Mechanical Technology,Wuxi Institute of Technology,Wuxi 214121
下载:  PDF (3800KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 采用熔融共混法制备了聚丙烯/聚乙醇酸共混物(PP/PGA),研究了相容剂聚丙烯接枝马来酸酐(PP-g-MAH)用量对共混物力学性能、熔融结晶行为、流变行为和断面形貌的影响。结果表明:PP-g-MAH的加入能明显改善共混体系的相容性,共混物的力学性能得到提升。PP-g-MAH对PGA结晶具有异相成核作用,且先结晶的PGA又可作为PP结晶的异相成核剂。随相容剂用量增大,PGA结晶温度升高,结晶完善程度降低,甚至不结晶,PP的结晶温度先降低后升高,且复数黏度呈先增大后减小的趋势。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
贾天飞
杨海存
马文中
龚方红
陶国良
刘春林
关键词:  聚丙烯  聚乙醇酸  相容剂  共混  结构与性能    
Abstract: Polypropylene/polyglycolic acid blends (PP/PGA) were prepared by melt blending.The effects of the content of PP-g-MAH compatibilizer on the mechanical properties,melt crystallization behavior,rheological behavior and fracture morphology of blends were investigated in detail.The results showed that the compatibility of the blend system was significantly enhanced with the addition of PP-g-MAH,the mechanical properties were improved.On the other hand,PP-g-MAH had heterogeneous nucleation effect on PGA crystallization,and the previously crystallized PGA can also be used as the heterogeneous nucleating agent for PP crystallization.With the increase of the amount of compatibilizer,the crystallization temperature of PGA was increased,but the degree of crystal perfection was decreased,and even did not crystallize.The crystallization temperature of PP decreased first and then increased,and the complex viscosity was increased first and then decreased.
Key words:  polypropylene    polyglycolic acid    compatilizer    blend    structure and property
收稿日期:  2018-04-26      修回日期:  2019-04-24                发布日期:  2019-10-10      期的出版日期:  2019-09-20
基金资助: 江苏省产学研前瞻性联合研究项目(BY2016029-05);国家自然科学基金(21406017);江苏省高等学校自然科学研究面上项目(18KJB150004)
通讯作者:  杨海存。   
作者简介:  贾天飞(1993-),男,硕士研究生,主要从事高分子材料结构与性能的研究。
引用本文:    
贾天飞, 杨海存, 马文中, 龚方红, 陶国良, 刘春林. 相容剂对聚丙烯/聚乙醇酸共混物结构与性能的影响[J]. 化工新型材料, 2019, 47(9): 203-206.
Jia Tianfei, Yang Haicun, Ma Wenzhong, Gong Fanghong, Tao Guoliang, Liu Chunlin. Influence of compatilizer on the structure and property of PP/PGA. New Chemical Materials, 2019, 47(9): 203-206.
链接本文:  
http://www.hgxx.org/CN/  或          http://www.hgxx.org/CN/Y2019/V47/I9/203
[1] 张永霞,谢昕,王庆涛,等.聚丙烯共混增韧改性研究进展[J].合成材料老化与应用,2018,47(1):85-90.
[2] 王鉴,王绪文,李安莲,等.聚丙烯化学改性方法[J].现代塑料加工应用,2010,22(6):55-59.
[3] 张英杰,梁基照.聚丙烯的物理改性[J].上海塑料,2007(3):9-12.
[4] Peyda S,Morshedian J,Karbalaei-Bagher M,et al.A novel technique in the foaming process of EPDM/PP via microwave radiation:the effect of blend compatibilization and additive encapsulation[J].RSC Advances,2016,6(84):81400-81407.
[5] 黄安荣,韦良强,孙静,等.多壁碳纳米管含量对聚丙烯/多壁碳纳米管介电复合材料性能的影响研究[J].化工新型材料,2018,46(3):58-61.
[6] Jolfaei A F,Gavgani J N,Jalali A,et al.Effect of organoclay and compatibilizers on microstructure,rheological and mechanical properties of dynamically vulcanized EPDM/PP elastomers[J].Polymer Bulletin,2015,72(5):1127-1144.
[7] Pinheiro L A,Bittencourt C S,Canevarolo S V.Real time assessment of the compatibilization of polypropylene/polyamide 6 blends during extrusion[J].Polymer Engineering and Science,2010,50(4):826-834.
[8] Razak N C A,Inuwa I M,Hassan A,et al.Effects of compatibilizers on mechanical properties of PET/PP blend[J].Composite Interfaces,2013,20(7):507-515.
[9] Velde K Van de,Kiedens P.Biopolymers:overview of several properties and consequences on their applications[J].Polymer Testing,2002,21(4):433-442.
[10] 王朝阳,赵耀明.聚乙醇酸类生物降解高分子[J].广州化学,2004,29(1):50-57.
[11] 陈群,许平,崔爱军.煤基聚乙醇酸技术进展[J].化工进展,2011,30(1):172-180.
[12] 何敏,罗兵,张雅琴,等.聚乙醇酸与聚丙烯共混研究[J].合成树脂及塑料,2007,24(4):83-84.
[13] 陈广新,刘景江.尼龙1010分别与未接枝和接枝马来酸酐的高抗冲聚苯乙烯的共混体系研究[J].高分子学报,1999(5):557-563.
[14] Edward K,Wang W J,Zhu S P,et al.Rheological and thermomechanical properties of long-chain-branched polyethylene prepared by slurry polymerization with metallocene catalysts[J].Journal of Applied Polymer Sciecne,2004,92(1):307-316.
[1] 崔爱军, 朱晨浩, 祝龙生, 薛士瀚, 辛健, 韦梅俊, 何明阳, 陈群. 抗氧剂对聚乙醇酸热稳定性能的影响[J]. 化工新型材料, 2019, 47(8): 197-200.
[2] 赵静, 王苗苗, 张建安, 吴明元, 吴庆云, 杨建军. 氮掺杂多孔碳材料的制备及其吸附性能研究[J]. 化工新型材料, 2019, 47(8): 252-255.
[3] 赵亚奇, 蔡甜甜, 郭雯静, 马浩龙, 吴颐曼, 雷顺天. 水溶性偶氮盐引发制备高分子量聚丙烯腈工艺研究[J]. 化工新型材料, 2019, 47(7): 115-119.
[4] 黄宇娇, 姚垚, 董雄伟. 缩硫脲分子改性聚丙烯腈纤维的制备与性能影响[J]. 化工新型材料, 2019, 47(7): 120-124.
[5] 陈华义, 赵亚奇, 冯巧, 代伟森, 胡淑一. 高分子量聚丙烯腈的碱法水解工艺研究[J]. 化工新型材料, 2019, 47(7): 187-189.
[6] 韩帅, 王彩霞, 贺拥军, 高健强. 利用液体弹珠制备可控制的缓释凝胶研究[J]. 化工新型材料, 2019, 47(7): 262-265.
[7] 李云艳, 张倩, 李会凡, 孟清, 王月欣. 改性氧化石墨烯相容剂的制备及在聚酰胺6/聚丙烯共混物中的应用研究[J]. 化工新型材料, 2019, 47(6): 105-108.
[8] 曹亚南, 张玉芳. 增容剂对聚对苯二甲酸丁二酯/聚丙烯共混体系相形态、热稳定性与流变性能影响研究[J]. 化工新型材料, 2019, 47(6): 147-151.
[9] 郝伟哲, 张学军, 田艳红. PAN纤维在惰性气氛中的热行为研究[J]. 化工新型材料, 2019, 47(6): 159-163.
[10] 杜斌, 陈商涛, 王宇杰, 彭占录, 张凤波, 王艳芳. 高模量聚丙烯管材料的结构与性能[J]. 化工新型材料, 2019, 47(6): 240-243.
[11] 赵富强, 陈俊英, 夏传俊, 李天聪, 黄霞. 杂化小直径血管组织工程支架基材的共混改性与相容性分析[J]. 化工新型材料, 2019, 47(5): 77-80.
[12] 李菁瑞, 曹果果, 郭文文, 郜艳荣, 游峰, 江学良, 姚楚. 污水处理用改性聚丙烯复合填料的制备及其性能研究[J]. 化工新型材料, 2019, 47(5): 117-120.
[13] 夏学莲,史向阳,赵海鹏,赵振新,郭靖怡,董英英. 热塑性高分子材料增韧机理研究进展[J]. 化工新型材料, 2019, 47(4): 34-37.
[14] 张希,李廷鱼,李朋伟,胡杰,李刚. 基于TEABF4/PAN-b-PEG-b-PAN柔性超级电容器的性能研究[J]. 化工新型材料, 2019, 47(4): 89-92.
[15] 赵洪凯,张克含,陈健. 纤维素和壳聚糖共混吸水材料的研究与发展[J]. 化工新型材料, 2019, 47(3): 26-30.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-38
版权所有 © 《化工新型材料》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn