Please wait a minute...
 首页  期刊简介 期刊订阅 广告合作 联系我们
 
最新录用  |  当期目录  |  过刊浏览  |  热点文章  |  阅读排行
化工新型材料  2019, Vol. 47 Issue (5): 213-217    
  开发与应用 本期目录 | 过刊浏览 | 高级检索 |
超声雾化法制备超细粉体的研究进展
刘洋, 贾庆明*, 蒋丽红, 陈亚君, 陕邵云
昆明理工大学化学工程学院,昆明650500
Research progress of ultrafine powder preparation by ultrasonic atomization
Liu Yang, Jia Qingming, Jiang Lihong, Cheng Yajun, Shang Shaoyun
Faculty of Chemical Eneineering,Kunming Unieversity of Science and Technology, Kungming 650500
下载:  PDF (3295KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 随着对超细粉体性能的要求越来越高,超细粉体的制备问题引起了人们的关注。传统的方法制备超细粉体无法控制粉体的性能,而超声雾化在超细粉体粒径、粒径分布及形貌调控等方面的独特优势,逐渐成为超细粉体制备的前沿技术。为此,对超声雾化制备超细粉体的工作原理进行了综述,重点阐述了超声雾化技术、工艺参数对粉体粒径、形貌的调控机制,分析了目前超声雾化制备超细粉体存在的问题,并对该领域的未来应用和挑战进行了展望。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
刘洋
贾庆明
蒋丽红
陈亚君
陕邵云
关键词:  超声雾化法  超细粉体  制粉技术  工艺参数    
Abstract: With the increasing demands on the properties of ultrafine powders,the preparation of ultrafine powders has attracted more and more attention.The performance of ultrafine powders cannot be controlled by traditional methods.Control of ultrafine powders size,particle size distribution and morphology in ultrasonic atomization has unique advantages,and the methods gradually become frontier technology for ultrafine powders preparation methods.The mechanism of this method was thoroughly reviewed,the size and morphology of ultrafine powders were discussed in term of the change of process and ultrasonic atomization technology.The existed problems,and the future application and challenges in this field were prospected.
Key words:  ultrasonic atomization    ultrafine powder    particle-making technology    technological parameter
收稿日期:  2018-07-25                     发布日期:  2019-06-17      期的出版日期:  2019-05-20
基金资助: 国家自然科学基金资助项目(21766016);国家自然科学基金资助项目(21566014)
通讯作者:  贾庆明(1977-),男,教授,博士生导师,研究方向为功能高分子材料。   
作者简介:  刘洋(1994-),女,硕士研究生,主要研究SnO2基功能材料。
引用本文:    
刘洋, 贾庆明, 蒋丽红, 陈亚君, 陕邵云. 超声雾化法制备超细粉体的研究进展[J]. 化工新型材料, 2019, 47(5): 213-217.
Liu Yang, Jia Qingming, Jiang Lihong, Cheng Yajun, Shang Shaoyun. Research progress of ultrafine powder preparation by ultrasonic atomization. New Chemical Materials, 2019, 47(5): 213-217.
链接本文:  
http://www.hgxx.org/CN/  或          http://www.hgxx.org/CN/Y2019/V47/I5/213
[1] Gurmen S,Ebin B,Stopić S,et al.Nanocrystalline spherical iron-nickel (Fe-Ni) alloy particles prepared by ultrasonic spray pyrolysis and hydrogen reduction (USP-HR)[J].Journal of Alloys & Compounds,2009,480(2):529-533.
[2] Iskandar F,Nandiyanto A B D,Widiyastuti W,et al.Production of morphology-controllable porous hyaluronic acid particles using a spray-drying method[J].Acta Biomaterialia,2009,5(4):1027-1034.
[3] Deepu P,Peng C,Moghaddam S.Dynamics of ultrasonic atomization of droplets[J].Experimental Thermal and Fluid Science,2018,92:243-247.
[4] Majumder M,Rendall C,Li M,et al.Insights into the physics of spray coating of SWNT films[J].Chemical Engineering Science,2010,65(6):2000-2008.
[5] Pohlman R,Heisler K,Cichos M.Powdering aluminium and aluminium alloys by ultrasound[J].Ultrasonics,1974,12(1):11-15.
[6] Backmark U,Backstrom N,L A.Production of metal powder by ultrasonic gas atomization[J].Powder Metallurgy International,1986,18(6):338-340.
[7] Pandey A B,Misra R D K,Kumar M.Production and microchemical characterization of ultrasonically gas atomized aluminium-lithium alloy powders[J].Powder Metallurgy International,1989,21(4):7-10.
[8] 曹凤国.超声加工技术[M].北京:化学工业出版社工业装备与信息工程出版中心,2005.
[9] Ramisetty K A,Pandit A B,Gogate P R.Investigations into ultrasound induced atomization[J].Ultrasonics Sonochemistry,2013,20(1):254-264.
[10] 冯维君.燃油燃气锅炉运行与管理[M].北京:中国劳动出版社,1998.
[11] 赵钦新,葛升群,惠世恩,等.中小型燃油燃气锅炉运行操作与维护[M].北京:机械工业出版社,2003.
[12] Simon J C,Sapozhnikov O A,Khokhlova V A,et al.Ultrasonic atomization of liquids in drop-chain acoustic fountains[J].Journal of Fluid Mechanics,2015,766(11):129-146.
[13] Xu H,Zeiger B W,Suslick K S.Sonochemical synthesis of nanomaterials[J].Chemical Society Reviews,2013,42(7):2555-2567.
[14] Suslick K S,Flannigan D J.Inside a collapsing bubble:sonoluminescence and the conditions during cavitation[J].Annual Review of Physical Chemistry,2008,59(1):659.
[15] Vehring R.Pharmaceutical particle engineering via spray drying[J].Pharmaceutical Research,2008,25(5):999-1022.
[16] Okuyama K,Abdullah M,Lenggoro W,et al.Preparation of functional nanostructured particles by spray drying[J].Advanced Powder Technology,2006,17(6):587-611.
[17] Nandiyanto A,Okuyama K.Progress in developing spray-drying methods for the production of controlled morphology particles:from the nanometer to submicrometer size ranges[J].Advanced Powder Technology,2011,22(1):1-19.
[18] Bang J H,Suslick K S.Applications of ultrasound to the synthesis of nanostructured materials[J].Advanced Materials,2010,22(10):1039-1059.
[19] Thanh N T,Maclean N,Mahiddine S.Mechanisms of nucleation and growth of nanoparticles in solution[J].Chemical Reviews,2014,114(15):7610-7630.
[20] Lee J H,Park S J.Preparation of spherical SnO2 powders by ultrasonic spray pyrolysis[J].Journal of the American Ceramic Society,2010,76(3):777-780.
[21] Overcash J W,Suslick K S.High surface area iron oxide microspheres via ultrasonic spray pyrolysis of ferritin core analogues[J].Chemistry of Materials,2015,27(10):3564-3567.
[22] Majeric P,Friedrich B,Rudolf R.Au-nanoparticle synthesis via ultrasonic spray pyrolysis with a separate evaporation zone[J].Materiali in Tehnologije,2015,49(5):791-796.
[23] Patil L A,Bari A R,Shinde M D,et al.Effect of precursor concentrations on structural,microstructural and optical properties of nanocrystalline ZnO powder synthesized by an ultrasonic atomization technique[J].Physica Scripta,2010,82(3):1741-1757.
[24] Eslamian M,Ashgriz N.Effect of precursor,ambient pressure,and temperature on the morphology,crystallinity,and decomposition of powders prepared by spray pyrolysis and drying[J].Powder Technology,2006,167(3):149-159.
[25] Rankin J M,Neelakantan N K,Lundberg K E,et al.Magnetic,fluorescent,and copolymeric silicone microspheres[J].Advanced Science,2015,2(6):1-5.
[26] Ebin B,Gurmen S.Synthesis and characterization of nickel particles by hydrogen reduction assisted ultrasonic spray pyrolysis(USP-HR) method[J].Powder & Particle,2011,29(29):134-140.
[27] Das H,Debnath N,Toda A,et al.Controlled synthesis of dense MgFe2O4 nanospheres by ultrasonic spray pyrolysis technique:effect of ethanol addition to precursor solvent[J].Advanced Powder Technology,2017.
[28] Wang W N,Lenggoro I W,Okuyama K,et al.Effects of ethanol addition and Ba/Ti ratios on preparation of barium titanate nanocrystals via a spray pyrolysis method[J].Journal of the American Ceramic Society,2006,89(3):888-893.
[29] Kawano M,Yoshida H,Hashino K,et al.Studies on synthetic conditions of spray pyrolysis by acids addition for development of highly active Ni-SDC cermet anode[J].Solid State Ionics,2006,177(37):3315-3321.
[30] Lim C H,Lee K T.Characterization of core-shell structured Ni@GDC anode materials synthesized by ultrasonic spray pyrolysis for solid oxide fuel cells[J].Ceramics International,2016,42(12):13715-13722.
[31] Schneider C A,Rasband W S,Eliceiri K W.NIH Image to ImageJ:25 years of image analysis[J].Nature Methods,2012:671-675.
[32] Zgür C,San O.The effect of reactor temperature gradient on microstructures of sodium borosilicate glass powders produced by ultrasonic spray pyrolysis technique[J].Ceramics International,2011,37(8):2991-2995.
[33] Widiyastuti W,Wang W N,Lenggoro I W,et al.Simulation and experimental study of spray pyrolysis of polydispersed droplets[J].Journal of Materials Research,2007,22(7):1888-1898.
[34] Shatrova N,Yudin A,Levina V,et al.Characteristics of Co3O4 and cobalt nanostructured microspheres:morphology,structure,reduction process,and magnetic properties[J].Materials Research Bulletin,2017,99:189-195.
[35] Huang Y,Gao Y,Zhang Q,et al.Hierarchical porous ZnWO4 microspheres synthesized by ultrasonic spray pyrolysis:characterization,mechanistic and photocatalytic NOx removal studies[J].Applied Catalysis A General,2016,515:170-178.
[36] Perez-Page M,Guzalowski R,Muche D N F,et al.Synthesis of porous yttria-stabilized zirconia microspheres by ultrasonic spray pyrolysis[J].Materials Letters,2017,188:41-44.
[37] Ebin B,Toparli C,Gurmen S.Preparation and magnetic characterization of Fe/Metal oxide nanocomposite particles by hydrogen reduction assisted ultrasonic spray pyrolysis method (USP-HR)[J].Powder & Particle,2013,104(5):483-488.
[38] Wen W S,Peng B,Yuan C L,et al.Preparation of doping titaniaantibacterialpowderby ultrasonic spray pyrolysis[J].Transactions of Nonferrous Metals Society of China,2008,18(5):1145-1150.
[39] Das H,Sakamoto N,Aono H,et al.Investigations of superparamagnetism in magnesium ferrite nano-sphere synthesized by ultrasonic spray pyrolysis technique for hyperthermia application[J].Journal of Magnetism & Magnetic Materials,2015,392:91-100.
[40] Apaydin R,Ebin B,Gurmen S.Single-step production of nanostructured Copper-Nickel (CuNi) and Copper-Nickel-Indium (CuNiIn) alloy particles[J].Metallurgical & Materials Transactions A,2016,47(7):3744-3752.
[41] Stopić S,Rudolf R,Bogovic J,et al.Synthesis of Au nanoparticles prepared by ultrasonic spray pyrolysis and hydrogen reduction[J].Materiali in Tehnologije,2013,5(5):577-583.
[42] Lang R J.Ultrasonic Atomization of Liquids[J].Journal of the Acoustical Society of America,1962,34(1):6.
[43] Mesguich D,Bassat J M,Aymonier C,et al.Nanopowder synthesis of the SOFC cathode material Nd2 NiO 4+δ by ultrasonic spray pyrolysis[J].Solid State Ionics,2010,181(21-22):1015-1023.
[44] Stopić S,Friedrich B.Synthesis of nsnodized metallic and coreshell particles by ultrasonic spray pyrolysis[J].Contemporsry Msterisls,2018,2(8):111-120.
[45] Gaudon M,Djurado E,Menzler N H.Morphology and sintering behaviour of yttria stabilised zirconia (8-YSZ) powders synthesised by spray pyrolysis[J].Ceramics International,2004,30(8):2295-2303.
[46] Goulart C,Djurado E.Synthesis and sintering of Gd-doped CeO2 nanopowders prepared by ultrasonic spray pyrolysis[J].Journal of the European Ceramic Society,2013,33(4):769-778.
[47] Garza M D L,Hernández T,Colás R,et al.Deposition of gold nanoparticles on glass substrate by ultrasonic spray pyrolysis[J].Materials Science & Engineering B,2010,174(1):9-12.
[48] Zheng J,Song F,Che S,et al.One step synthesis process for fabricating NiFe2O4 nanoparticle loaded porous carbon spheres by ultrasonic spray pyrolysis[J].Advanced Powder Technology,2018,29:1474-1480.
[49] Jokić B,Drmanić S,Radetic T,et al.Synthesis of submicron carbon spheres by the ultrasonic spray pyrolysis method[J].Materials Letters,2010,64(20):2173-2176.
[50] Cheng W,Wu P,Zou X,et al.Study on synthesis and blue emission mechanism of ZnO tetrapodlike nanostructures[J].Journal of Applied Physics,2006,100(5):054311-054311.
[51] Goulart C,Djurado E.Synthesis and sintering of Gd-doped CeO2 nanopowders prepared by ultrasonic spray pyrolysis[J].Journal of the European Ceramic Society,2013,33(4):769-778.
[1] 郑亚峰, 谭彪, 南海, 倪冰, 王永顺. 工艺参数对HMX基挤注炸药装药质量的影响[J]. 化工新型材料, 2018, 46(5): 111-113.
[2] 刘超, 史高峰, 董玉灿, 曹文丽. 基于静电纺丝法制备碳纳米纤维及其应用[J]. 化工新型材料, 2018, 46(12): 229-232.
[3] 张宇,王威,徐磊. 浅谈聚偏氟乙烯压电薄膜的制备方法[J]. 化工新型材料, 2018, 46(10): 227-229.
[4] 贾荣仙, 闫芳. 新型壳聚糖交联改性物的制备及其性能研究[J]. 化工新型材料, 2018, 46(1): 169-171.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-38
版权所有 © 《化工新型材料》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn