Please wait a minute...
 首页  期刊简介 期刊订阅 广告合作 联系我们
 
最新录用  |  当期目录  |  过刊浏览  |  热点文章  |  阅读排行
化工新型材料  2019, Vol. 47 Issue (5): 135-138    
  科学研究 本期目录 | 过刊浏览 | 高级检索 |
先驱体转化法制备ZSM-5/SiC复合材料的研究
周路路1,2, 刘伟华2, 吴永龙2, 李运波1, 张文发2, 张文礼2, 王谋华2*
1.上海大学材料科学与工程学院,上海200444;
2.中国科学院上海应用物理研究所,上海201800
Study on preparation of ZSM-5/SiC composite derived from precursor
Zhou Lulu1,2, Liu Weihua2, Wu Yonglong2, Li Yunbo1, Zhang Wenfa2,
Zhang Wenli2, Wang Mouhua2
1.College of Materials Sciences and Engineering,Shanghai University,Shanghai 200444;
2.Shanghai Institute of Applied Physics,Chinese Academy of Sciences,Shanghai 201800
下载:  PDF (2586KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 将碳化硅(SiC)陶瓷先驱体聚碳硅烷(PCS)与ZSM-5分子筛共混并压片制成ZSM-5/PCS胚体,然后采用辐射固化和高温裂解制得具有特定形状的ZSM-5/SiC复合材料,并对ZSM-5/SiC复合材料进行了表征。研究表明,经过辐射固化-高温烧结制得的ZSM-5/SiC复合材料,既能保持ZSM-5分子筛特有的孔道结构,又融合了SiC的高强度、耐高温和抗腐蚀等优点,产率达到85.32%,为制备大尺寸完整形状的复合型催化剂提供了新的思路。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
周路路
刘伟华
吴永龙
李运波
张文发
张文礼
王谋华
关键词:  ZSM-5分子筛  聚碳硅烷  复合材料  辐射固化  高温裂解    
Abstract: ZSM-5/SiC composites with a specific shape were successfully prepared by the shaping,irradiation curing and pyrolysis of PCS with ZSM-5 zeolites.ZSM-5/SiC composites were characterized.The results revealed that ZSM-5/SiC derived from radiation-cured ZSM-5/PCS could not only keep the shape of precursors after pyrolysis,but also took the advantages of excellent performance of SiC such as the high strength,high temperature and corrosion resistance.Furthermore,the yield of precursors was 85.32%.The research provided a new insight for the preparation of large-size and complete-shaped composite catalysts.
Key words:  ZSM-5 zeolite    PCS    composite    irradiation curing    pyrolysis
收稿日期:  2017-12-28                     发布日期:  2019-06-17      期的出版日期:  2019-05-20
基金资助: 国家自然科学基金(11575279,11505268)
通讯作者:  王谋华(1978-),男,博士,研究员,主要从事辐射化学基础和应用研究。   
作者简介:  周路路(1993-),男,硕士,主要从事高分子材料辐射改性研究。
引用本文:    
周路路, 刘伟华, 吴永龙, 李运波, 张文发, 张文礼, 王谋华. 先驱体转化法制备ZSM-5/SiC复合材料的研究[J]. 化工新型材料, 2019, 47(5): 135-138.
Zhou Lulu, Liu Weihua, Wu Yonglong, Li Yunbo, Zhang Wenfa,
Zhang Wenli, Wang Mouhua. Study on preparation of ZSM-5/SiC composite derived from precursor. New Chemical Materials, 2019, 47(5): 135-138.
链接本文:  
http://www.hgxx.org/CN/  或          http://www.hgxx.org/CN/Y2019/V47/I5/135
[1] Tanabe K,Hölderich W F.Industrial application of solid acid-base catalysts[J].Applied Catalysis A General,1999,181(2):399-434.
[2] Degnan T F,Chitnis G K,Schipper P H.History of ZSM-5 fluid catalytic cracking additive development at Mobil[J].Microporous & Mesoporous Materials,2000,35(2):245-252.
[3] 张昊楠,唐海,沙俊鹏,等.热辅助CuO/ZSM-5活化过硫酸盐降解苯酚废水研究[J].化工新型材料,2017,45(3):186-189.
[4] Tavolaro A,Drioli E.Zeolite Membranes[J].Advanced Materials,1999,11(12):975-996.
[5] Caro J,Noack M.Zeolite membranes-recent developments and progress[J].Microporous & Mesoporous Materials,2008,115(3):215-233.
[6] 王政,王燕,罗民,等.ZSM-5分子筛膜/SiC复合材料的制备与表征[J].材料导报,2010,24(22):105-108.
[7] Nhut J M,Vieira R,Pesant L,et al.Synthesis and catalytic uses of carbon and silicon carbide nanostructures[J].Catalysis Today,2002,76(1):11-32.
[8] Meunier F,Delporte P,Heinrich B,et al.Synthesis and characterization of high specific surface area vanadium carbide;application to catalytic oxidation[J].Journal of Catalysis,1997,169(169):33-44.
[9] Ledoux M J,Pham-Huu C,Keller N,et al.Selective oxidation of H2S in claus tail-gas over SiC supported NiS2 catalyst[J].Catalysis Today,2000,61(1):157-163.
[10] Keller N,Pham-Huu C,Estournès C,et al.Low temperature use of SiC-supported NiS2-based catalysts for selective H2S oxidation:role of SiC surface heterogeneity and nature of the active phase[J].Applied Catalysis A General,2002,234(1):191-205.
[11] 黄思远.高比表面积碳化硅的制备及表征[J].广州化工,2011,39(4):51-52.
[12] 罗民,王政,王燕,等.ZSM-5分子筛膜/多孔SiSiC陶瓷复合孔结构微反应器的制备[J].无机材料学报,2009,24(2):330-334.
[13] Wang Y Y,Jin G Q,Guo X Y.Growth of ZSM-5 coating on biomorphic porous silicon carbide derived from durra[J].Microporous & Mesoporous Materials,2009,118(1):302-306.
[14] Colombo P.Engineering porosity in polymer-derived ceramics[J].Journal of the European Ceramic Society,2008,28(7):1389-1395.
[17] Jones R,Szweda A,Petrak D.Polymer derived ceramic matrix composites[J].Composites Part A:(Applied Science and Manufacturing),1999,30(4):569-575.
[18] Colombo P,Mera G,Riedel R,et al.Polymer-derived ceramics:40 years of eesearch and innovation in advanced ceramics[J].Journal of the American Ceramic Society,2010,93(7):1805-1837.
[19] Konegger T,Patidar R,Bordia R K.A novel processing approach for free-standing porous non-oxide ceramic supports from polycarbosilane and polysilazane precursors[J].Journal of the European Ceramic Society,2015,35(9):2679-2683.
[20] 刘洪丽,王雯,李婧,等.先驱体转化法制备Si-B-C-N陶瓷微球[J].化工新型材料,2016,44(8):224-226.
[21] Ly H Q,Taylor R,Day R J,et al.Conversion of polycarbosilane (PCS) to SiC-based ceramic part 1,characterization of PCS and curing products[J].Journal of Materials Science,2001,36(16):4037-4043.
[22] Jang Y S,Jank M,Maier V,et al.SiC ceramic micropatterns from polycarbosilanes[J].Journal of the European Ceramic Society,2010,30(13):2773-2779.
[1] 白玉峰, 何小芳, 康冬冬, 蔡国辉, 吴梦林. 石墨烯/聚吡咯复合材料制备及应用研究进展[J]. 化工新型材料, 2019, 47(5): 5-9.
[2] 李覃, 李斌, 李帅臻, 赵梁成. 碳系填充型导电聚氨酯弹性体性能研究[J]. 化工新型材料, 2019, 47(5): 68-72.
[3] 郭准, 于菲, 赵阳, 赵玉真. 原位聚合法制备石墨烯/聚酰亚胺复合材料及其性能[J]. 化工新型材料, 2019, 47(5): 73-76.
[4] 王寒, 郭军, 郭霞, 贾剑红, 李文凤, 牛宝龙. 大豆分离蛋白对单壁碳纳米管的功能化修饰及其性能研究[J]. 化工新型材料, 2019, 47(5): 139-143.
[5] 张军丽, 闫永康, 张宁. 琥珀酰化壳聚糖/石墨烯复合材料的制备及对酸性品红的吸附[J]. 化工新型材料, 2019, 47(5): 249-252.
[6] 闫丽,安学锋. “离位”增韧ES-U3160/5284复合材料的制备及性能研究[J]. 化工新型材料, 2019, 47(4): 167-170.
[7] 丛庆,林凤森,李光友,曲晓东,王龙,李丰选. 高性能碳纤维/环氧树脂复合材料板的制备及其性能表征研究[J]. 化工新型材料, 2019, 47(4): 81-83.
[8] 段宪法,李玲,赵晓芳,于永建,刘翔宇. 改性双马来酰亚胺/苯并GFDA1嗪共混树脂性能的研究[J]. 化工新型材料, 2019, 47(4): 96-99.
[9] 徐海升, 何丽娟, 王豪. 新型石墨烯复合材料的制备及其催化应用研究进展[J]. 化工新型材料, 2019, 47(3): 6-10.
[10] 郝盈颖,孙学凤,石磊,周国伟. 不同形貌NiMoO4纳米材料及其复合材料的制备和应用研究进展[J]. 化工新型材料, 2019, 47(3): 20-25.
[11] 罗超,曹海建,黄晓梅,金博伦,王洪. 树脂基体种类对三维中空夹芯织物复合材料力学性能影响的研究[J]. 化工新型材料, 2019, 47(3): 138-142.
[12] 付欣, 杨蓉, 刘磊, 陈丹, 朱岸明, 李嘶晨, 路蕾蕾. 蜂窝状三维碳材料的制备及其在锂硫电池中的应用研究[J]. 化工新型材料, 2019, 47(2): 85-89.
[13] 周云斌, 李敏娜, 居璨, 周林成, 吴琼, 黄峥. 负载Pd蛋黄-蛋壳型磁性碳纳米复合材料Fe3O4@C-Pd的制备及其催化性能研究[J]. 化工新型材料, 2019, 47(2): 223-227.
[14] 吴蓬勃, 王成君, 朱洪宇, 孙寒雪. 多孔石墨烯制备及其纳米复合材料的研究进展[J]. 化工新型材料, 2019, 47(1): 6-9.
[15] 温友, 孟祥胜, 范卫锋, 阎敬灵, 王震. 聚酰亚胺纤维增强树脂基复合材料的研究[J]. 化工新型材料, 2019, 47(1): 57-61.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-38
版权所有 © 《化工新型材料》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn