Please wait a minute...
 首页  期刊简介 期刊订阅 广告合作 联系我们
 
最新录用  |  当期目录  |  过刊浏览  |  热点文章  |  阅读排行
化工新型材料  2018, Vol. 46 Issue (9): 180-182    
  科学研究 本期目录 | 过刊浏览 | 高级检索 |
溶剂热法制备球形MoS2材料及其电化学性能研究
武宏大, 杨占旭, 邵军桥
辽宁石油化工大学化学化工与环境学部,抚顺113006
Synthesis and electrochemical performance of spherical MoS2 by solvothermal method
Wu Hongda, Yang Zhanxu, Shao Junqiao
College of Chemistry,Chemical Engineering and Environmental Engineering,Liaoning Shihua University,Fushun 113006
下载:  PDF (2563KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 以四硫代钼酸铵为原料、在甲酰胺-乙醇体系中,使用十六烷基三甲基溴化铵(CTAB)作为表面活性剂,通过溶剂热法成功制备出了球状MoS2,并对其进行SEM、TEM、XRD表征。结果表明,所制备样品为具有球状形貌、纯相的MoS2。同时将样品作为负极材料组装成扣式电池,并对其进行电化学性能测试。所制备的材料在0.28A/g的电流密度下首次充放电容量分别达到997.9mA·h/g、1179.1mA·h/g,库伦效率达到84.6%。经过100周恒流充放电循环后,材料的放电容量仍能达到740.8mA·h/g,样品表现出了良好的循环稳定性。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
武宏大
杨占旭
邵军桥
关键词:  MoS2  四硫代钼酸铵  负极材料  锂离子电池  溶剂热法    
Abstract: The spherical molybdenum disulfide was synthesized by solvothermal method used formamide-ethanol as solvent system,ammonium tetrathiomolybdate as raw material and hexadecyl trimethyl ammonium bromide (CTAB) as surfactant.The sample was characterized by XRD,SEM and TEM.The results showed that the prepared sample was pure MoS2 with spherical morphology.The sample was used as the cathode material assembled into a button cell and characterized by electrochemical performance test.The first charge/discharge capacity of material reached 997.9mA·h/g and 1179.1mA·h/g respectively under a current density of 0.28A/g and the coulombic efficiency reached 84.6%.After 100 cycles,the material retained the capacity of 740.8mA·h/g under the current density of 100 mA/g,the sample showed good cycling stability.
Key words:  MoS2    ammonium tetrathiomolybdate    cathode material    lithium ionic battery    solvothermal method
收稿日期:  2017-12-22                     发布日期:  2018-11-05      期的出版日期:  2018-09-20
基金资助: 国家自然科学基金(21671092)
通讯作者:  杨占旭(1982-),男,博士,教授,研究方向为储能材料和新型催化材料。   
作者简介:  武宏大(1993-),男,硕士研究生,研究方向为储能材料。
引用本文:    
武宏大, 杨占旭, 邵军桥. 溶剂热法制备球形MoS2材料及其电化学性能研究[J]. 化工新型材料, 2018, 46(9): 180-182.
Wu Hongda, Yang Zhanxu, Shao Junqiao. Synthesis and electrochemical performance of spherical MoS2 by solvothermal method. New Chemical Materials, 2018, 46(9): 180-182.
链接本文:  
http://www.hgxx.org/CN/  或          http://www.hgxx.org/CN/Y2018/V46/I9/180
[1]Sharon M,Hsu W K,Kroto H W,et al.Camphor-based carbon nanotubes as an anode in lithium secondary batteries[J].Journal of Power Sources,2002,104(1):148-153.
[2]Jung D S,You N K,Kang Y C,et al.Recent progress in electrode materials produced by spray pyrolysis for next-generation lithium ion batteries[J].Advanced Powder Technology,2014,25(1):18-31.
[3]He L,Liao X Z,Yang K,et al.Electrochemical characteristics and intercalation mechanism of ZnS/C composite as anode active material for lithium-ion batteries[J].Electrochimica Acta,2011,56(3):1213-1218.
[4]Tenne R.Advances in the synthesis of inorganic nanotubes and fullerene-like nanoparticles[J].Angewandte Chemie International Edition,2003,42(42):5124-5132.
[5]Li X L,Li Y D.MoS2 nanostructures:synthesis and electrochemical Mg2+ intercalation[J].The Journal of Physical Chemistry B,2004,108(37):13893-13900.
[6]Hwang H,Kim H,Cho J.MoS2 nanoplates consisting of disordered graphene-like layers for high rate lithium battery anode materials[J].Nano Letters,2011,11(11):4826-4830.
[7]Du G,Guo Z,Wang S,et al.Superior stability and high capacity of restacked molybdenum disulfide as anode material for lithium ion batteries[J].Chemical Communications,2010,46(7):1106-1108.
[8]Zhao C,Kong J,Yao X,et al.Thin MoS2 nanoflakes encapsulated in carbon nanofibers as high-performance anodes for lithium-ion batteries[J].Acs Applied Materials & Interfaces,2014,6(9):6392-6398.
[9]Xie D,Xia X,Wang Y,et al.Nitrogen-doped carbon embedded MoS2 microspheres as advanced anodes for lithium- and sodium-ion batteries[J].Chemistry-A European Journal,2016,22(33):11617-11623.
[10]Ding J,Zhou Y,Li Y,et al.MoS2 nanosheet assembling superstructure with a three-dimensional ion accessible site:a new class of bifunctional materials for batteries and electrocatalysis[J].Chemistry of Materials,2016,28(7):2074-2080.
[1] 戴仲葭. 锂离子电池正极材料LiMn0.8-xFe0.15+xMg0.05PO4的制备、表征及电化学过程研究[J]. 化工新型材料, 2018, 46(9): 198-201.
[2] 卢璐, 李军, 蓝利芳, 许帅军, 黄思. 过渡金属氧化物负极材料的研究进展[J]. 化工新型材料, 2018, 46(9): 65-68.
[3] 刘家伟, 于洪珺, 张玉环, 陈均青, 卑凤利. LiFePO4/CuO/Ag/RGO四元复合材料的制备与电化学性能研究[J]. 化工新型材料, 2018, 46(9): 117-120.
[4] 吕文俊, 张海朗, 李道荣, 李倩倩. 锂离子电池负极材料Li4Ti5O12的固相法制备及性能研究[J]. 化工新型材料, 2018, 46(8): 146-148.
[5] 张敏, 王晓, 孙红梅, 拜科·诺夫, 杨超, 宿新泰. Ni/Al2O3/C的合成及催化CO甲烷化反应性能研究[J]. 化工新型材料, 2018, 46(7): 191-193.
[6] 朱瑞, 邓卫斌, 李军, 廉培超, 谢德龙, 梅毅. 锂离子电池硅-碳负极材料的研究进展[J]. 化工新型材料, 2018, 46(7): 34-39.
[7] 张敬, 孙学凤, 高婷婷, 周国伟. TiO2/MoS2复合材料的制备及其在光催化和储能电池中的应用研究进展[J]. 化工新型材料, 2018, 46(6): 43-47.
[8] 戴剑锋, 闫兴山, 田西光, 李维学, 王青. 静电纺丝法制备尖晶石型LiMn2O4纳米纤维锂离子电池正极材料[J]. 化工新型材料, 2018, 46(5): 204-207.
[9] 任超时, 刘明珠, 张庆华, 詹晓力. 交联网状结构聚硅氧烷类固体电解质的制备及电化学性能研究[J]. 化工新型材料, 2018, 46(5): 208-212.
[10] 关壬铨, 翟宏菊, 孙德武, 王岩. MoS2基复合材料的制备及其在催化、润滑和电化学领域的应用研究进展[J]. 化工新型材料, 2018, 46(4): 213-215.
[11] 李林, 刘振新, 徐蓓, 李晶晶, 吴德鹏, 李鸿阳, 张晓, 姚纪伟, 邵晨, 贾巧娟, 方少明, 王力臻, 邢宇. 节省锂资源的磷酸铁锂水热合成路径[J]. 化工新型材料, 2018, 46(3): 187-189.
[12] 汪燕鸣, 朱波, 刘晓玉, 陈盛, 王飞,. 溶剂热法合成纳米磷酸钴锰锂正极材料及其电化学性能研究[J]. 化工新型材料, 2018, 46(3): 175-177.
[13] 何冀川, 王红, 周天明, 喻国强, 刘树信. 固相法合成LiNi0.8Co0.15Al0.05O2正极材料及其电化学性能研究[J]. 化工新型材料, 2018, 46(3): 160-163.
[14] 徐莲花, 王启昌. 锂离子电池正极材料磷酸钒锂的改性研究进展[J]. 化工新型材料, 2018, 46(3): 49-52.
[15] 畅波, 李亚娥, 康利涛, 梁伟, 赵兴国. 核壳结构Si/C复合负极材料的制备与储锂性能研究[J]. 化工新型材料, 2018, 46(2): 79-82.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-38
版权所有 © 《化工新型材料》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn