Please wait a minute...
 首页  期刊简介 期刊订阅 广告合作 联系我们
 
最新录用  |  当期目录  |  过刊浏览  |  热点文章  |  阅读排行
化工新型材料  2018, Vol. 46 Issue (8): 42-45    
  综述与专论 本期目录 | 过刊浏览 | 高级检索 |
金属零件3D打印技术研究进展
赵高升, 刘秀军*, 张志明, 张庆印
天津工业大学环境与化学工程学院,天津300387
Research progress of metal part manufactured by 3D printing
Zhao Gaosheng, Liu Xiujun, Zhang Zhiming, Zhang Qingyin
School of Environmental and Chemical Engineering,Tianjin Polytechnic University,Tianjin 300387
下载:  PDF (1153KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 金属零件3D打印技术是整个3D打印体系中最为前沿和最有潜力的技术,是增材制造的重要发展方向。简述了3D打印工艺中适用于金属材料的工艺,主要包括选择性激光烧结(SLS)技术、选择性激光熔化(SLM)技术、选择性激光熔覆(SLC)技术、层叠法成型(LOM)技术、电子束熔覆技术。讨论了各工艺特征、存在问题以及研究进展。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
赵高升
刘秀军
张志明
张庆印
关键词:  3D打印  金属零件  选择性激光烧结  电子束熔覆    
Abstract: The metal part 3D printing technology is the most cutting-edge and the most potential technology in the entire 3D printing system,the metal parts 3D printing technologies are the main trend of increasing material manufacturing.3D printing technologies were suitable for metallic materials,and mainly including Selective Laser Sintering (SLS),Selective Laser Melting (SLM),Selective Laser Cladding (SLC),Laminated Object Manufacturing (LOM) and electron beam cladding technology were presented.The features was not only discussed,but also involved the existing problems and the research progress of these technologies.
Key words:  3D printing    metal part    selective laser sintering    electron beam cladding
收稿日期:  2017-04-13                     发布日期:  2018-09-18      期的出版日期:  2018-08-20
基金资助: 国家自然科学基金(21476172)
通讯作者:  刘秀军,男,教授,研究方向为3D打印材料和碳材料。   
作者简介:  赵高升(1989-),男,硕士,研究方向为3D打印材料。
引用本文:    
赵高升, 刘秀军, 张志明, 张庆印. 金属零件3D打印技术研究进展[J]. 化工新型材料, 2018, 46(8): 42-45.
Zhao Gaosheng, Liu Xiujun, Zhang Zhiming, Zhang Qingyin. Research progress of metal part manufactured by 3D printing. New Chemical Materials, 2018, 46(8): 42-45.
链接本文:  
http://www.hgxx.org/CN/  或          http://www.hgxx.org/CN/Y2018/V46/I8/42
[1] 黄树槐,张祥林,马黎,等.快速原型制造技术的进展[J].中国机械工程,1997,8(5):8-12.
[2] 刘光富,李爱平.快速成形与快速制模技术[M].上海:同济大学出版社,2004.
[3] 李小丽,马剑雄,李萍,等.3D打印技术及应用趋势[J].自动化仪表,2014,35(1):1-5.
[4] Zhang Y,Hao L,Savalani M M,et al.Characterization and dynamic mechanical analysis of selective laser sintered hydroxyapatite-filled polymeric composites[J].Journal of Biomedical Materials Research Part A,2008,86(3):607-616.
[5] Mazzoli A,Moriconi G,Pauri M G.Characterization of an aluminum-filled polyamide powder for applications in selective laser sintering[J].Material and Design,2007,28(3):993-1000.
[6] Olakanmi E O.Effect of mixing time on the bed density,and microstructure of selective laser sintered aluminium powders[J].Materials Research,2012,15(2):167-176.
[7] Olakanmi E O.Selective laser sintering/melting (SLS/SLM) of pure Al,Al-Mg,and Al-Si powder:Effect of processing conditions and powder properties[J].Journal of Materials Processing Technology,2013,213(8):1387-1405.
[8] Walker D C,Caley W F,Brochu M.Selective laser sintering of composite copper-tin powders[J].Journal of Materials Research,2014,29(17):1997-2005.
[9] Sreenivasan R,Goel A,Bourell D L.Sustainability issues in laser-based additive manufacturing[J].Physics Procedia,2010,5(Part A):81-90.
[10] Lykov P A,Sapozhnikov S B,Shulev I S,et al.Composite micropowders for selective laser sintering[J].Metallurgist,2016,59(9/10):851-855.
[11] Amorim F L,Lohrengel A,Neubert V,et al.Selective laser sintering of Mo-CuNi composite to be used as EDM electrode[J].Rapid Prototyping Journal,2014,20(1):59-68.
[12] Xie Fangxia,He Xinbo,Cao Shunli,et al.Structural and mechanical characteristics of porous 316L stainless fabricated by indirect selective laser sintering[J].Journal of Materials Processing Technology,2013,213(6):838-843.
[13] Xu F,Wong Y S,Loh H T.Toward generic models for comparative evaluation and process selection in rapid prototyping and manufacturing[J].Journal of Manufacturing Systems,2000,19(5):283-296.
[14] Paul R,Anand S.Process energy analysis and optimization in selective laser sintering[J].Journal of Manufacturing Systems,2012,31(4):429-437.
[15] Wang Jin,Yang Mo,Zhang Yuwen.A nonequilibrium thermal model for direct metal laser sintering[J].Numerical Heat Transfer Part A-Applications,2015,67(3):249-267.
[16] Thijs L,Verhaeghe F,Craeghs T,et al.A study of the microstructural evolution during selective laser melting of Ti-6Al-4V[J].Acta Materialia,2010,58(9):3303-3312.
[17] Yadroitsev I,Bertrand P,Smurov I.Parametric analysis of the selective laser melting process[J].Applied Surface Science,2007,253(19):8064-8069.
[18] Miranda G,Faria S,Bartolomeu F,et al.Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting[J].Materials Science and Engineering A,2016,657:43-56.
[19] Masoudi A,Boliot R,Coddet C.Investigation of the laser-powder-atmosphere interaction zone during the selective laser melting process[J].Journal of Materials Processing Technology,2015,225:122-132.
[20] Song Bo,Dong Shujuan,Deng Sihao,et al.Microstructure and tensile properties of iron parts fabricated by selective laser melting[J].Optics and Laser Technology,2014,56:451-460.
[21] Jia Qingbo,Gu Dongdong.Selective laser melting additive manufacturing of Inconel 718 superalloy parts:Densification,microstructure and properties[J].Journal of Alloys and Compounds,2014,585:713-721.
[22] Durejko T,Zietala M,Polkowski W,et al.Thin wall tubes with Fe3Al/SS316L graded structure obtained by using laser engineered net shaping technology[J].Materials & Design,2014,63(2):766-774.
[23] Jeng J Y,Lin M C.Mold fabrication and modification using hybrid processes of selective laser cladding and milling[J].Journal of Materials Processing Technology,2001,110(1):98-103.
[24] 于承雪,景财年,李怀学.激光熔覆裂纹的形成机理及控制方法[J].航空制造技术,2012,(4):75-79.
[25] Liu Dejian,Lippold J C,Li Jia,et al.Laser engineered net shape (LENS) technology for the repair of Ni-base superalloy turbine components[J].Metallurgical and Materials Transactions A,2014,45A(10):4454-4469.
[26] 于冬梅.LOM(分层实体制造)快速成型设备研究与设计[D].石家庄:河北科技大学,2011.
[27] Ghariblu H,Rahmati S.New process and machine for layered manufacturing of metal parts[J].Journal of Manufacturing Science & Engineering,2014,136(4):152-161.
[28] Sasahara H,Tsutsumi M,Chino M.Development of a layered manufacturing system using sheet metal-polymer lamination for mechanical parts[J].International Journal of Advanced Manufacturing Technology,2005,27(3):268-273.
[29] Ahn D,Kweon J H,Choi J,et al.Quantification of surface roughness of parts processed by laminated object manufacturing[J].Journal of Materials Processing Technology,2012,212(2):339-346.
[30] 赵万生,郭艳玲,詹涵菁,等.数控快走丝线切割机床加工精度分析及软件补偿方法[J].制造技术与机床,2000,(12):12-14.
[31] 杨鑫,汤慧萍,贺卫卫,等.电子束烧结快速成形技术[J].钛工业进展,2007,24(3):10-14.
[32] Cormier D,Harrysson O,West H.Characterization of H13 steel produced via electron beam melting[J].Rapid Prototyping Journal,2004,10(1):35-41.
[33] Taminger K M B,Hafley R A.Characterization of 2219 aluminum produced by electron beam freeform fabrication[J].University of Texas at Austin,2002:482-489.
[34] 颜永年,齐海波.快速制造的内涵与应用[J].航空制造技术,2004(5):26-29.
[35] 刘其南,逄启寿.电子束应用于快速成型(RP)之初探[J].机械研究与应用,2005,18(6):27-28.
[36] Taminger K M B,Hafley R A.Electron beam freeform fabrication:a rapid metal deposition process[A].Proceedings of the 3th Annual Automotive Composites Conference[C].Troy,MI,2003.
[37] 林峰,颜永年,闫占功,等.一种电子束选区同步烧结工艺及三维分层制造设备:中国,1648802[P].2005-08-03.
[1] 屈银虎, 时晶晶, 成小乐, 祁志旭. 微电池薄膜电极的制备及发展趋势[J]. 化工新型材料, 2018, 46(7): 21-24.
[2] 周勇,秦海芳,杨怡,刘巧云. 紫外光固化钛掺杂含硼硅氧烷的制备及在3D打印材料中的应用研究[J]. 化工新型材料, 2017, 45(9): 199-200.
[1] Xiao Yu, Lv Cheng, Zhang Guoyou. Epoxy resin modified by PMMA microsphere wrapped by graphene oxide[J]. New Chemical Materials, 2017, 45(9): 62 -64 .
[2] Su Wei, Ran Meng, Zhang Ai, Sun Yan. Preparation of sulfur-doped microporous carbon and its adsorption property[J]. New Chemical Materials, 2018, 46(4): 161 -164 .
[3] Fan Yingge. Study on preparation and optical property of one-dimensional ZnO nanorod by sol-gel dip coating[J]. New Chemical Materials, 2018, 46(4): 189 -192 .
[4] Zheng Zhen, Ding Chengli, Li Huiping, Fu Jingjing. Synthesis and property of hydrophobic functionalized cotton linter cellulose/SiO2 composite aerogel[J]. New Chemical Materials, 2018, 46(4): 230 -233 .
[5] Lin Yuan. Research status and application progress of thin film solar cells[J]. New Chemical Materials, 2018, 46(6): 57 -60 .
[6] Chen Kai, Wang Qiang, Sun Ting, You Min, Xia Zuxi. Research on impact of chemical etching on superhydrophobic surface property[J]. New Chemical Materials, 2018, 46(6): 206 -209 .
[7] Zheng Dandan, Chang Wei, Xi Qiang, Yu Cuihua. Preparation and photocatalytic activity of Cd1-xZnxS[J]. New Chemical Materials, 2018, 46(5): 181 -183 .
[8] Han Fei, Zong Yue, Di Song, Wang Shaopo. Adsorption of copper ion in aqueous solution by activated boron nitride[J]. New Chemical Materials, 2018, 46(5): 195 -198 .
[9] Chang Lin, Zhao Yuntao, Bi Yinping, Ren Yiwei. Preparation and characterization of sodium polystyrene sulfonate grafted polysulfone forward osmosis membrane[J]. New Chemical Materials, 2018, 46(7): 114 -117 .
[10] Cai Tingting, Liu Rongwei, Wang Yuanyuan, Zhai Yongxing, Duan Ze, Zhang Jian. Preparation and electrochemical performance test of nickel cobalt sulfide/carbon microsphere electrode[J]. New Chemical Materials, 2018, 46(8): 119 -122 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 《化工新型材料》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn